Every order over $300 gets free shipping*
Full Australian Manufacturers Warranty. Buy with confidence from an official brand stockist.
Shipped with Tracking and Complimentary Insurance
Enjoy your purchase today and pay in installments that suit your budget
Monolith M-10 V2 10-inch THX Certified Powered Subwoofer sets the standard for bass output, low distortion, and affordability. With chest-thumping bass that plays down to well under 20Hz, the Monolith subwoofer unleashes cinema-level volume, with the ability to convey and articulate the subtle nuances of music. The Monolith subwoofer cabinets have been redesigned for a sleeker look, rounded edges, and an inset subwoofer for a better aesthetic appearance.
HDF (High-Density Fiberboard), not MDF, was utilised resulting in a sonically inert cabinet. The internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discolouration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances.
The 10" model uses a single 88.5mm port with inner and outer flares. A port is used to ensure high SPL capability at low frequency (fb=21Hz). The dual flares help reduce turbulence and asymmetrical distortions. Additional adjustments can be made by sealing the port with the supplied plug. The "floating" grille is made from non-resonant MDF to provide rigidity, while the entire structure is offset from the cabinet to maximize the airflow of the woofer and ports.
The Monolith™ 10" driver was developed from the ground up, with a design focus on achieving output, accuracy, dynamics, and linearity, while minimizing distortion. Enclosed in a cabinet made from HDF material, massive internal bracing, and outfitted with a single port that can utilize a foam plug to run the subwoofer in a sealed mode.
The 500W RMS amplifier is built around a Texas Instruments® 48‑bit data path (with 28‑bit filter coefficients) and DSP engine. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each driver. The high-efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theatre or music system.
The Monolith™ subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments® 48‑bit data path (with 28‑bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation. Each amplifier's transfer function, power output limiting, and thermal protection are monitored to the millisecond and are customized for each woofer and cabinet air volume combination. This state‑of‑the‑art Class D amplifier technology ensures maximum headroom capability, excellent transient response, high output, and very low distortion when driving the Monolith 10" THX® Certified Select Subwoofer.
McCalls AV strives to make every purchase a happy one.
Please read our refund, return and repair policy before making a purchase from McCalls AV, below outlined are our policy on refunds, returns and repairs and your rights under the Australian Consumer Law.
Always inspect any products that we have delivered to you or that you picked up from the McCalls AV store, to make sure you are completely satisfied with the condition of the products, including that the products are of merchantable quality.
If you have any questions about this policy, please contact our staff on 02 4732 6605 or click here to email.
Please choose carefully as refunds for change of mind would only be accepted with a restocking fee subject to approval. We recommend you carefully choose any products before adding them to your cart and continuing with your order. The restocking fee is 25% if approved.
If any products are delivered damaged, please contact our Customer service Staff as soon as possible. McCalls AV will organise to have your products returned to McCalls AV and to arrange for a replacement of your products fast. Damaged products need to be returned in the same condition received by you with all original packaging, accessories and manuals.
McCalls AV will refund all delivery charges in the event an item has to be returned due to a fault or damage and no replacement items can be found. Delivery refund will only be approved within 14 days of purchase and all original packaging, accessories and manuals are included.
Refer to Consumer Guarantee laws for more information.
Any Refunds will be made by McCalls AV using the same method of payment used to make your purchase. Refunds will normally be processed within five (5) days.
McCalls AV reserve the right to refund and cancel any order when the below occurs.
You will be contacted by email to explain why a refund has been issued and products not delivered.
Before returning any goods please contact our service team for approval and return merchandise number 02 4732 6605
You may also contact McCalls AV on 02 4732 6605 or visit the store where the items were collected. A McCalls AV team member will help you with any return or repair. This will include inspecting the products, organising for the products to be repaired, or offering you a replacement.
Products need to be returned within a reasonable time period. This timeframe may vary from product to product and may depend on the type of product you purchased and the price you paid.
If any goods cannot be easily returned to the McCalls AV store, due to where you are located please contact our service staff for help with logistics 02 4732 6605
Products returned under warranty will be assessed and/or repaired within a reasonable time period. You will be provided with a repair time after the item is assessed. This time may vary due to reasons beyond our or the manufacturer's control, such as parts availability and incorrect fault advice given.
You may be required to pay labour, assessment or freight costs, such as where goods are assessed to have been damaged by misuse or accident, or where the goods are assessed not to be faulty. We will provide you with a cost if this case arrises.
If any electrical goods that you returned may lose settings or user saved preferences during the resetting and rebooting phases in a repair sequence.
Purchasing from McCalls AV is an acceptance of the above policies.
If you have any questions relating to your Order, please contact us on 02 4732 6605 or email customer support on info@mccallsav.com.au.